Cast-iron three-phase asynchronous motors IE2 - IE3
| Power outputs | 0,12 - 75kW |
| Voltages | Up to 690V |
| Frames | 63 - 280 |
| Efficiency classes | IE2 - IE3, where applicable |
| Sectors | Food / Marine / Rail / Industrial / Snowmaking / Steel Industry |
| Most common applications | Machine tools / Fans / Pumps / Handling and Lifting Systems |
We designed these motor series specifically to be flexible in the combination of their materials.
We support you in choosing the configuration that best meets the characteristics of the installation in which these motors will operate.
The series name identifies the combination of materials of the main mechanical components of the engine (case and endshields):
| Series name | 1B | 2B | 3B | 4B | 5B |
| D-End Endshield | Aluminum | Cast-Iron | Aluminum | Cast-Iron | |
| Case | Aluminum | Cast-Iron | |||
| N-End Endshield | Aluminum | Cast-Iron | |||
| Standard configuration | Special configuration | |
|---|---|---|
| Standards | Applicable IEC EN 60034 | Specification on request |
| Polarity / Speed | Single | Double / Triple |
| Cooling method | IC 411 | IC 410 / IC 416 / IC 418 |
| IP Index of Protection | IP55 | IP56 / IP65 / IP66 |
| Insulaton Class | F | H |
| Temperature rise Class | B | F / H |
| Altitude | <1000m a.s.l. | up to 4000m a.s.l. |
| Power supply | Main | Frequency converter |
| Rotor | Squirrel cage | - |
| Material of the rotor windings | Aluminum | - |
| Duty | S1 | S2 … S9 |
| Ambient temperature | -20°C / +40°C | -50°C / + 120°C |
| Shaft extension | D-End | D-End + N-End |
| Shape of the shaft extension | Cylindric, with key | Conical / special |
| Material of the shaft | Steel C40 | 39NiCrMo3 / Stainless steel |
| Bearings | Ball | Roller / Angular |
| Seal ring | MIM | Viton / Silicon / Labirinth |
| Material of the screws | Galvanised | Stainless steel |
| Vibration grade | A (with half key) | B (with half or full key) |
| Material of the fan | Polyamide | Aluminum |
| Material of the fan cover | Steel | - |
| Lifting eyebolt | From 100 frame and above | On request |
| Feet | Fixed | Removable feet (250-280 frames) |
| Terminal box - position | On the right side, when seen from D-End | On top / On the left / Flying leads |
| Terminal box - material | Aluminum (cast-iron for 200 and 225) | Cast-iron |
| Cable entry | On the right side | Rotatable in step of 90° |
| Q.ty of terminals (single polarity) | 6 | - |
| Q.ty of terminals (double polarity) | 6 | 12 |
| Q.ty of terminals (triple polarity) | 12 | - |
Windings
Insulation class H
Tropicalisation
Stator windings with enhanced insulation system for inverter
Special voltage and/or frequency
Double impregnation
Encapsulation of the windings
Protections
Bi-metal protection
PTC Thermistors
PT100 Thermo-resistances
PT1000 Thermo-resistances
Anticondensation heaters
Transducers
Arrangment for vibration detector
Arrangment for speed detector (toothed wheel)
Encoder
Painting and solutions for extreme environment
Special painting colour (std RAL5010)
Special painting process for agressive environment
Drainage hole
Solutions for low temperatures (down to -50°C)
Solutions for high temperatures ( up to +120°C)
Anti-rain canopie
Anti-sun canopie
IP56, IP65, IP66 protection degrees
Stainless steel screws
Bearings
Sealed bearings
Roller bearings
Insulated bearings
Hybrid bearings
Bearings for low temperatures
Bearings for high temperatures
Angular bearings
Re-greasing systems
D-End fixed bearing
labirinth ring
Viton ring
Silicon ring
Shaft and Fan
Special shaft extension
Second shaft extension
Non-ventilated motor (IC410)
Forced ventilation (IC416)
Non-ventilated motor, externally cooled (IC418)
Aluminum fan
Vibration grade B (with half or full key)
Terminal box
12 terminals
Brass cableglands
Special cableglands
Position of terminal box
Direction of cable entry
Material of terminal box
Flying leads
Auxiliary terminal box
Special cable entry